AT commands
are used to control MODEMs. AT is the abbreviation for Attention. These commands come fromHayes命令that were used by the Hayes smart modems. The Hayes commands started with AT to indicate the attention from the MODEM. The dial up and wireless MODEMs (devices that involve machine to machine communication) need AT commands to interact with a computer. These include the Hayes command set as a subset, along with other extendedAT commands.
AT commands with a GSM/GPRS MODEM or mobile phone can be used to access following information and services:
1.Information and configuration pertaining to mobile device or MODEM and SIM card.
2.SMS services.
3.MMS服务。
4.Fax services.
5.Data and Voice link over mobile network.
海耶斯子集的命令被称为基本的commands and the commands specific to a GSM network are called extended AT commands.
Types of AT Commands:
There are four types of AT commands:
Fig. 1: Image Showing Classification of AT Commands
1)Test commands– used to check whether a command is supported or not by the MODEM.
SYNTAX: AT=?
For example: ATD=?
2)Read command
– used to get mobile phone or MODEM settings for an operation.
SYNTAX: AT?
For example: AT+CBC?
3)Set commands
– used to modify mobile phone or MODEM settings for an operation.
SYNTAX：at <命令名称> = value1，value2，…，valuen
Some values in set commands can be optional.
For example: AT+CSCA=”+9876543210”, 120
4)Execution commands
– used to carry out an operation.
SYNTAX: AT=parameter1, parameter2, …, parameterN
The read commands are not available to get value of last parameter assigned in execution commands because parameters of execution commands are not stored.
For example: AT+CMSS=1,”+ 9876543210”, 120
Explanation of commonly used AT commands:
1)AT
– This command is used to check communication between the module and the computer.
例如，
AT
OK
The command returns a result code OK if the computer (serial port) and module are connected properly. If any of module or SIM is not working, it would return a result code ERROR.
2)+CMGF
——这个命令用于设置短信模式。要么text or PDU mode can be selected by assigning 1 or 0 in the command.
语法：at+cmgf =
0: for PDU mode
1: for text mode
The text mode of SMS is easier to operate but it allows limited features of SMS. The PDU (protocol data unit) allows more access to SMS services but the operator requires bit level knowledge of TPDUs. The headers and body of SMS are accessed in hex format in PDU mode so it allows availing more features.
例如，
AT+CMGF=1
OK
3)+cmgw
– This command is used to store message in the SIM.
SYNTAX:AT+CMGW=” Phone number”>Message to be storedCtrl+z
作为+cmgw和电话号码的一种类型，“>”符号出现在下一行上，可以输入消息。在这种情况下，可以输入多个线条消息。这就是为什么通过提供“ CTRL+Z”组合来终止消息的原因。当按下CTRL+Z时，屏幕上显示以下信息响应。
+cmgw: Number on which message has been stored
4)+cmgs
– This command is used to send a SMS message to a phone number.
SYNTAX:AT+CMGS= serial number of message to be send.
As the command AT+CMGS and serial number of message are entered, SMS is sent to the particular SIM.
例如，
AT+CMGS=1
OK
5)ATD
- 此命令用于拨打或调用一个号码。
SYNTAX: ATD;(Enter)
例如，
ATD123456789;
6)ATA
– This command is used to answer a call. An incoming call is indicated by a message ‘RING’ which is repeated for every ring of the call. When the call ends ‘NO CARRIER’ is displayed on the screen.
SYNTAX: ATA(Enter)
As ATA followed by enter key is pressed, incoming call is answered.
例如，
RING
RING
ATA
7)ATH
– This command is used to disconnect remote user link with the GSM module.
SYNTAX: ATH (Enter)
List of AT commands:
The AT commands for both, GSM module and the mobile phone, are listed below. Some of these commands may not be supported by all the GS
可用的M模块。另外，可能会有一些命令不受某些手机的支持。
Testing :
|
Command
|
Description
|
|
AT
|
检查模块和计算机之间的通信。
|
Call control :
|
Command
|
Description
|
|
ATA
|
Answer command
|
|
ATD
|
Dial command
|
|
ATH
|
Hang up call
|
|
ATL
|
Monitor speaker loudness
|
|
ATM
|
Monitor speaker mode
|
|
ATO
|
Go on-line
|
|
ATP
|
Set pulse dial as default
|
|
ATT
|
Set tone dial as default
|
|
AT+CSTA
|
Select type of address
|
|
AT+CRC
|
Cellular result codes
|
Data card Control :
|
Command
|
Description
|
|
ATI
|
Identification
|
|
ATS
|
Select an S-register
|
|
ATZ
|
Recall stored profile
|
|
AT&F
|
恢复出厂设置
|
|
AT&V
|
View active configuration
|
|
AT&W
|
Store parameters in given profile
|
|
AT&Y
|
Select Set as power up option
|
|
AT+CLCK
|
Facility lock command
|
|
AT+COLP
|
Connected line identification presentation
|
|
AT+GCAP
|
Request complete capabilities list
|
|
AT+GMI
|
Request manufacturer identification
|
|
AT+GMM
|
Request model identification
|
|
AT+GMR
|
Request revision identification
|
|
AT+GSN
|
Request product serial number identification (IMEI)
|
Phone control :
|
Command
|
Description
|
|
AT+CBC
|
Battery charge
|
|
AT+CGMI
|
Request manufacturer identification
|
|
AT+CGMM
|
Request model identification
|
|
AT+CGMR
|
Request revision identification
|
|
AT+CGSN
|
Request product serial number identification
|
|
AT+CMEE
|
Report mobile equipment error
|
|
AT+CPA
|
Phone activity status
|
|
AT+CPBF
|
Find phone book entries
|
|
AT+CPBR
|
Read phone book entry
|
|
AT+CPBS
|
Select phone book memory storage
|
|
AT+CPBW
|
Write phone book entry
|
|
AT+CSCS
|
Select TE character set
|
|
AT+CSQ
|
Signal quality
|
计算机数据接口：
|
Command
|
Description
|
|
ATE
|
Command Echo
|
|
ATQ
|
Result code suppression
|
|
ATV
|
Define response format
|
|
ATX
|
Response range selection
|
|
AT&C
|
定义DCD用法
|
|
AT&D
|
Define DTR usage
|
|
AT&K
|
Select flow control
|
|
AT&Q
|
Define communications mode option
|
|
AT&S
|
Define DSR option
|
|
AT+ICF
|
DTE-DCE character framing
|
|
AT+IFC
|
DTE-DCE Local flow control
|
|
AT+IPR
|
Fixed DTE rate
|
Service :
|
Command
|
Description
|
|
AT+CLIP
|
Calling line identification presentation
|
|
AT+CR
|
Service reporting control
|
|
AT+DR
|
Data compression reporting
|
|
AT+ILRR
|
DTE-DCE local rate reporting
|
Network Communication parameter :
|
Command
|
Description
|
|
ATB
|
Communications standard option
|
|
AT+CBST
|
选择承载服务类型
|
|
AT+CEER
|
Extended error report
|
|
AT+CRLP
|
Radio link protocol
|
|
AT+DS
|
Data compression
|
Miscellaneous :
|
Command
|
Description
|
|
A/
|
Re-execute command line
|
|
AT?
|
Command help
|
|
AT*C
|
Start SMS interpreter
|
|
AT*T
|
Enter SMS block mode protocol
|
|
AT*V
|
Activate V.25bis mode
|
|
AT*NOKIATEST
|
Test command
|
|
AT+CESP
|
Enter SMS block mode protocol
|
SMS Text mode :
|
Command
|
Description
|
|
AT+CSMS
|
Select message service
|
|
AT+CPMS
|
Preferred message storage
|
|
AT+CMGF
|
Message format
|
|
AT+CSCA
|
Service centre address
|
|
AT+CSMP
|
Set text mode parameters
|
|
AT+CSDH
|
Show text mode parameters
|
|
AT+CSCB
|
Select cell broadcast message types
|
|
AT+CSAS
|
Save settings
|
|
在+cres
|
Restore settings
|
|
AT+CNMI
|
New message indications to TE
|
|
AT+CMGL
|
List messages
|
|
AT+CMGR
|
Read message
|
|
AT+CMGS
|
Send message
|
|
AT+CMSS
|
Send message from storage
|
|
AT+CMGW
|
Write message to memory
|
|
AT+CMGD
|
Delete message
|
SMS PDU mode :
|
Command
|
Description
|
|
AT+CMGL
|
List Messages
|
|
AT+CMGR
|
Read message
|
|
AT+CMGS
|
Send message
|
|
AT+CMGW
|
Write message to memory
|
Filed Under:More Editor's Picks
Questions related to this article?
Ask and discuss onEDAboard.comandElectro-Tech-Online.comforums.
Tell Us What You Think!!
You must belogged into post a comment.